I have to change a linux routing to a router to do only a small NAT. In once side i have a PLC (ip 192.168.1.65/24) that need to see 8 PLC in network another network (192.168.0.0/24) as "localnet" ips (it don't route). In the 192.168.0.0/24 side i have only 1 ip (192.168.0.80) and all the conection are "masquerade".
Now i have the networks in 2 nic of the linux box.
The problem that i have is... what's the router right for my?
It have a traffic is really low (like 10Kbps), but it have to be robust because it route connections for a electrical generation plant that work 24/7.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...