Router/Switch VLAN Configuration Examples

[matt.karsten]

I am looking for examples of configurations on both a router and a switch that have VLANs set up. On Cisco's site or personal examples. I am hoping that the configurations will be close to Best Practices (not using VLAN 1 for example). If there are ACLs set up to deny or allow traffic, that is fine but not necessarily a requirement.

Specifically I am trying to set up a 2800 Router and a 3750 using multiple VLANs and want to make sure I am doing it correctly and if I am not, to have some examples in front of me that I can modify mine based on. The router will have one interface on the outside and one on the inside.

I am currently just setting these up in a Lab environment to make sure it will do what we want.

Thanks.

[frankzehrer · Accepted solution]

Hi Matt,

try this one here (tech overview):

http://www.cisco.com/en/US/tech/tk389/tk689/tsd_technology_support_protocol_home.html

And maybe this one (3750 specific):

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00801cc828.shtml

Hope that helps.

Best regards,

Frank