cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
494
Views
0
Helpful
3
Replies

router3 and router2 cannot ping vlan1 from three switch

kaiserjude1010
Level 1
Level 1

Hi,

Need your help with regarding to this task I need to ping all vlan1 switch from r2 r3, I tried avdertise using eigrp network 192.168.1.0 still same problem.

PFA for your reference:

2 Accepted Solutions

Accepted Solutions

cadet alain
VIP Alumni
VIP Alumni

Hi,

the ip default-gateway must be set to 192.168.1.1

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.

View solution in original post

g_parmar83
Level 1
Level 1

hello Kaiser Jude Guerrero

do u have the SVI for vlan 1 on swithc with ip address

like

int vlan 1

ip address 192.168.1.10 255.255.255.0

exit

and ip default-gateway 192.168.1.1

then you should be able to ping it unless some routing issue is there.

thanks

gaurav

View solution in original post

3 Replies 3

cadet alain
VIP Alumni
VIP Alumni

Hi,

the ip default-gateway must be set to 192.168.1.1

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.

g_parmar83
Level 1
Level 1

hello Kaiser Jude Guerrero

do u have the SVI for vlan 1 on swithc with ip address

like

int vlan 1

ip address 192.168.1.10 255.255.255.0

exit

and ip default-gateway 192.168.1.1

then you should be able to ping it unless some routing issue is there.

thanks

gaurav

kaiserjude1010
Level 1
Level 1

Thanks for your help .

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card