Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

routes from VRF to Global Table

According to the attachment, I am running OSPF between CE2 and PE2 and the rest of the switches bgp. mpls LDP enable between PE's. The routes in the VRF's on CE2 (VRF1/VRF2) i need to advertise in to the global routing table on PE2 so i can get those routes advertise in to BGP on PE2 so that PE1 and CE1 can see those routes. I don't want to enable trunking between CE2/PE2 to accomplish that or use route leaking.

Is there another way to get the vrf's routes on CE2 to PE2 BGP routing? Please note that PE2 is not aware of the VRF's..

2 REPLIES
New Member

Re: routes from VRF to Global Table

Hi,

You can loop interfaces using a cross over cable on the same router and put them in different vrfs/global routing table.At PE2 redistribute OSPF into BGP

HTH,

Rakesh

Re: routes from VRF to Global Table

Rakesh,

thanks for your comment. can you please provide more info.

thanks

francico

130
Views
0
Helpful
2
Replies