Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Routing between two subnets.

I have two networks,Physicallyconnected .I.e;192.168.0.0 &192.168.1.0,How the communication possible between 2 networks.Where to configure routing.

3 REPLIES

Re: Routing between two subnets.

Which device you are using? What's your setup. Explain and we will help you.

-amit singh

New Member

Re: Routing between two subnets.

Hi Mohanthy,

what you need to is to have a layer 3 switch to do this.

hope this helps

rate this post if cleared.

New Member

Re: Routing between two subnets.

Hi,

Inorder to make two Subnet exchange information, we need a L3 Device.

It will be very helpful if you could share your setup

Regard

Danny

297
Views
0
Helpful
3
Replies