Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Routing Between VLANS

Hello -

I have a 3750 stack with routing enabled. I have two vlans, one for management and one for the office PCs. I can access the management from the switches if I telnet from one to another, but I am unable to access the switches via telnet from an office PC? I have done this before without any problems, but for some reason it is not working now. What could be the problem? Thanks

4 REPLIES

Re: Routing Between VLANS

is the ping working from workstation vlan?

New Member

Re: Routing Between VLANS

No ping doesn't work from the PC. Works from the switch.

Re: Routing Between VLANS

Do your switches have a default gateway configured, so they know how to get to the PC VLAN?

By the same token, do the PCs have a default gateway configured?

Kevin Dorrell

Luxembourg

New Member

Re: Routing Between VLANS

I have added the GW for the Management VLAN as well as the GW for the Office VLAN on the switches. If I connect into the Office VLAN GW, I can telnet from the core to the switches. The PCs are configured to route to the Office VLAN GW.

134
Views
0
Helpful
4
Replies
CreatePlease to create content