Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Routing issue 871

Hello,

I am trying to host a wbesite on a Linux server that sits behind an 871w router. When I try to telnet to the public ip port 80 I get "Could not open connection to the host on port 80" Do I need to add a NAT route or modify the ACL? My config is attached.

Thank you,

John

4 REPLIES
New Member

Re: Routing issue 871

You will need a NAT statement, what's your public and private IP for your Linux server? You can post a fake public.

New Member

Re: Routing issue 871

Public (fake) 73.183.224.30

linux server: 10.0.1.99

Thanks for your reply...

Re: Routing issue 871

Hi,

You have a ACL also applied on the fasteth interface.

regards,

pravin

New Member

Re: Routing issue 871

Static NAT rule.

static (inside,outside) 73.183.224.30 10.0.1.99 netmask 255.255.255.255

ACL (not sure if needed, since you already have internal ACL)

permit tcp any host 73.183.224.30 eq www

110
Views
0
Helpful
4
Replies
CreatePlease to create content