Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Routing issue from another subnet

HI All

From our site B we are not able to reach VPN  user

setup is like

VPN  user( 192.168.100.0)-------SITE A nerwork (192.168.10.0)----------  SITE B ( 192.168.30.0)

The MPLS is working through OSPF we have did route map for some subnets

From Site B if we try to do trace route it is getting failed  after it reaches the siteA wan

Site A MPLS wan  192.168.15.1

Site B MPLS WAN 192.168.17.1


I here attached the configuration and network diagram  and the configuration of the router and switches

Please help us to resolve the issue

regards

RR

1 REPLY
Gold

Routing issue from another subnet

Hi Raja,

On your site A MPLS switch i can see the static route as below.

ip route 192.168.100.0 255.255.255.0 192.168.10.251

The next hope which is showing here is 192.168.10.251 (Not sure if this should be pointing to switch 192.168.10.254) which accroding to your diagram is Sonic Firewall. Firewall more likely wouldn't be allowing traceroute and hence that may be the reason your saying trace result as your seeing now.

How is the routing and firewall policy looking on the firewall? From firewall are you able to reach 192.168.100.x and 192.168.30.x network

Regards

Najaf

Please rate when applicable or helpful !!!

158
Views
0
Helpful
1
Replies
CreatePlease to create content