Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

routing out of serial and isdn interfaces

Hi all, when routing out of serial, and isdn interfaces, how come we can point the traffic out of the interface rather than a next hop ip address and it still works ?

2 REPLIES
Silver

Re: routing out of serial and isdn interfaces

You can use exit interface in place of the next-hop ip-address if you want,but its got to be on a point-to-point link,such as a WAN.This command won't work on a LAN such as Ethernet.

The command to configure ip route using next-hop_address or exitinterface is:

ip route [destination_network] [mask] [next-hop_address or exitinterface]

Example:

ip route 172.16.3.0 255.255.255.0 serial 0/0

New Member

Re: routing out of serial and isdn interfaces

how come we dont need to use a next hop ip address in this case ?

277
Views
0
Helpful
2
Replies