Here is a test config that I had setup to check the same stuff. The toplogy that I used was like R1 --> R2 and R3 and both R2 and R3 inturns connect back to R4.
The test was to use IPSLA and object tracking to fail-over the traffic from R1 to either of the connection in case of an indirect failure in the connectivity. I was pinging the R4 loopback addresses from R1 and tried shutting down the R2 and R3 link to R4.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.