having a few problems with getting some routing going
first router (cisco 881) is on the 192.168.99.x range (network 1) and is connect physically to the second router via setting up seperate port on second router and uses a ip address on the 192.168.99.x range, the first router (cisco 881) uses using static routes to get to to the second router (cisco 881 also)on the 192.168.40.x range (network 2). this routing works perfectly
now heres is the spanner
i would like to access network 3 from network 1
network 3 on the range 192.168.41.x (cisco srp521w) is connected to network 2 (192.168.40.x) via a site to site VPN
how do i go about setting this up, or is this not possible
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...