Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Routing VLANs to external networks

Hi

Would you please help me out on this, i have the following setup:

Extranet

|

Pix

|

Router

|

Core Switch

|

Edge Switches

The extranet is connected via VPN, VLAN1 is being used in addition to Vlans 2-10,

the router and the internal Pix interface are on the same subnet as VLAN1, IP routing is configured on the core and a default ip route to the pix is being used.

TO access the extranet static routes are being added on the core.

The problem is that except for Vlan1 none of the Vlans can access the extranet.

Can you please help me out to configure the core in a way that allows all Vlans to access the extranet

Many thanks

2 REPLIES
Silver

Re: Routing VLANs to external networks

Could you provide the running configurtion. (sh run)

Re: Routing VLANs to external networks

Ensure that you have a path back to the other VLANs via the pix and router. VLAN1 would appear as a locally connect subnet, the other VLANs destination addresses would have to be configured.

Regards

Allan.

116
Views
0
Helpful
2
Replies
CreatePlease to create content