I have 3 /24 networks that connect over a VPN tunnel right now. I have created a VLAN network for one of the networks that separates the departments, but have not implemented it yet. I have connected the VLAN network over the VPN tunnel but unable for the other location to connect to the /24 network that is existing. I can connect to the other locations RDP and any other way but they cant connect to that network.
The equipment are
ASA 5510 /30
It looks as if the traffic is making it to the ASA but not passed the routing port of the 3550.
Is there something that should be configured for routing. Like the access list on the ASA should they be the same on the 3550?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...