I have a 2921 with a RPS-Adptr-2921-51 installed and connected to a RPS 2300.
I plugged the router and RPS to 2 different circuits, the router powers up but when I pull the power to the internal power supply of the router, it powers down and doesnt return even with the RPS powered on.
I also notice the "RPS" indicator light on the RPS-Adptr-2921-51 is not lit.
This router is the only device connected to the RPS.
powered both units off plugged in the 2921 to rps plugged in rps to power (left internal power of 2921 unplugged) waited 1 minute, rps and router powered on a minute after that, rps stayed on, router powered off
I'm working on a project that includes basic router configurations. I configurated everything including: line console 0, line vty 0 15 and secret passwords. There are 3 routers in the network and every LAN is going t...
Desire to create Terminal Server ("TS" in this document) out of 2811 Cisco Router with HWIC-16A card (with Octal cables)
Desire to use SSH over Telnet
TS is ip'ed, SSH access configured (to the TS)
Python based Script to BULK Import/Delete devices using Cisco Prime API
Check my Repo on GitHub for all the details ( see below link )