Hi everyone im on the middle of a messy thing i have 1 C2921-AX/K9 and 1 WS-C2960X-48TS-L connected to a RPS with two power supplies of 750watts but when i connect both and test the redundancy with the RPS unplugged the main power supply both the SW and de Router going off, the question is how many power supplies i need in what combination? 750 and 1100 or both of 1100 watts?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...