Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

RSPAN clearing DSCP settings

Hi,

I am generating traffic with a few different DSCP values (Voice, Signaling, other)

When I SPAN the ports of devices in the path I can see the correct DSCP values at each point.

When I RSPAN the same devices & interfaces the DSCP values are all set to 0.

What do I have to do to make sure RSPAN passes the same DSCP value as SPAN would?

Regards, MH

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: RSPAN clearing DSCP settings

The rewrite only occurs during an RSPAN session where there is an untrusted port.Trusting dscp on the ingress interface and having the client set dscp. In this condition, the dscp value will not be rewritten through the rspan session

1 REPLY
Bronze

Re: RSPAN clearing DSCP settings

The rewrite only occurs during an RSPAN session where there is an untrusted port.Trusting dscp on the ingress interface and having the client set dscp. In this condition, the dscp value will not be rewritten through the rspan session

161
Views
0
Helpful
1
Replies
CreatePlease login to create content