Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

RSPAN: VoIP Traffic

RSPAN

Customer has bought voice recorder software, and would like to capture.

viop traffic from vlan 10 and vlan 20

Please see attachment.

Q. How do I configure Rspan on the edge and core switches to cature the voice traffic.

Q. Will the voice recored server host port be a trunk port.

Please advise,

Regards,

Colm

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: RSPAN: VoIP Traffic

Q. How do I configure RSPAN on the edge and core switches to capture the voice traffic.

A: In the Edge switches you configure a SPAN session with VLAN 10 or VLAN 20, respectively, as the source, and a RSPAN VLAN as destination.

Example:

vlan xxx

name RSPAN_VLAN

remote-span

exit

monitor session 1 source interface vlan10|vlan20

monitor session 1 destination remote vlan xxx

In the core you configure the RSPAN VLAN as source and the physical interface to which the Voice Recorder is attached as the destination. Example:

vlan xxx

name RSPAN_VLAN

remote-span

exit

monitor session 1 source remote vlan xxx

monitor session 1 destination interface gig1/1

Make sure that VLANxxx is allowed on the trunk between edge switches and core switch.

Read more about SPAN and RSPAN here: http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_46_se/configuration/guide/swspan.html

Q. Will the voice recored server host port be a trunk port.

A: No. The port will be a SPAN destination port. See http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_46_se/configuration/guide/swspan.html#wp1036749 for details.

HTH.

Ingolf

1 REPLY
Bronze

Re: RSPAN: VoIP Traffic

Q. How do I configure RSPAN on the edge and core switches to capture the voice traffic.

A: In the Edge switches you configure a SPAN session with VLAN 10 or VLAN 20, respectively, as the source, and a RSPAN VLAN as destination.

Example:

vlan xxx

name RSPAN_VLAN

remote-span

exit

monitor session 1 source interface vlan10|vlan20

monitor session 1 destination remote vlan xxx

In the core you configure the RSPAN VLAN as source and the physical interface to which the Voice Recorder is attached as the destination. Example:

vlan xxx

name RSPAN_VLAN

remote-span

exit

monitor session 1 source remote vlan xxx

monitor session 1 destination interface gig1/1

Make sure that VLANxxx is allowed on the trunk between edge switches and core switch.

Read more about SPAN and RSPAN here: http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_46_se/configuration/guide/swspan.html

Q. Will the voice recored server host port be a trunk port.

A: No. The port will be a SPAN destination port. See http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_46_se/configuration/guide/swspan.html#wp1036749 for details.

HTH.

Ingolf

265
Views
0
Helpful
1
Replies