rspan

jawwalit · ‎02-12-2007

hi all;

i want to ask if 4006 switch support rspan (remote span ) or not.

For your information its contain sup III and IOS software

Amit Singh · ‎02-12-2007

Yes, it should support RSPAN. What is the IOS you are running. Please paste the show version from the switch.

-amit singh

smothuku · ‎02-12-2007

Hi ,

It supports RSPAN.If possible can you paste the CatOS and IOS which you are using in 4006 switch.

Thanks,

satish

jawwalit · ‎02-12-2007

thanks

please see the following IOS version

Cisco Internetwork Operating System Software

IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-IS-M), Version 12.1(8a)EW1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Compiled Wed 20-Feb-02 18:02 by eaarmas

Image text-base: 0x00000000, data-base: 0x00AA30DC

ROM: 12.1(12r)EW

cs-01-lan uptime is 3 days, 14 hours, 40 minutes

System returned to ROM by reload

System image file is "bootflash:cat4000-is-mz.121-8a.EW1.bin"

cisco WS-C4006 (MPC8245) processor (revision 7) with 262144K bytes of memory.

Processor board ID FOX0708S04A

Last reset from Reload

152 Gigabit Ethernet/IEEE 802.3 interface(s)

467K bytes of non-volatile configuration memory.

Configuration register is 0x2102

jawwalit · ‎02-15-2007

can you please give me the version of iOS that support Rspan, and how i check in my switch that it support rspan

thanks

Jon Marshall · ‎02-15-2007

Hi

I don't think your IOS supports rspan. From the config doc for your IOS they only talk about span:-

It looks like you need 12.1(20)EW as a minimum. The best thing to do is check on software advisor which is a Cisco tool

HTH

Jon

jawwalit · ‎02-15-2007

thanks,

i checked it on the software advisor bu it give the following nessege:

Remote SPAN (RSPAN) Support for source and destination SPAN ports located on other compatible switches

for your knowledge the 4006 consist supIII engine

thanks