Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

rspan

hi all;

i want to ask if 4006 switch support rspan (remote span ) or not.

For your information its contain sup III and IOS software

6 REPLIES
Cisco Employee

Re: rspan

Yes, it should support RSPAN. What is the IOS you are running. Please paste the show version from the switch.

-amit singh

Silver

Re: rspan

Hi ,

It supports RSPAN.If possible can you paste the CatOS and IOS which you are using in 4006 switch.

Thanks,

satish

New Member

Re: rspan

thanks

please see the following IOS version

Cisco Internetwork Operating System Software

IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-IS-M), Version 12.1(8a)EW1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Wed 20-Feb-02 18:02 by eaarmas

Image text-base: 0x00000000, data-base: 0x00AA30DC

ROM: 12.1(12r)EW

cs-01-lan uptime is 3 days, 14 hours, 40 minutes

System returned to ROM by reload

System image file is "bootflash:cat4000-is-mz.121-8a.EW1.bin"

cisco WS-C4006 (MPC8245) processor (revision 7) with 262144K bytes of memory.

Processor board ID FOX0708S04A

Last reset from Reload

152 Gigabit Ethernet/IEEE 802.3 interface(s)

467K bytes of non-volatile configuration memory.

Configuration register is 0x2102

New Member

Re: rspan

can you please give me the version of iOS that support Rspan, and how i check in my switch that it support rspan

thanks

Hall of Fame Super Blue

Re: rspan

Hi

I don't think your IOS supports rspan. From the config doc for your IOS they only talk about span:-

http://www.cisco.com/en/US/products/hw/switches/ps663/products_configuration_guide_chapter09186a00800f0e28.html

It looks like you need 12.1(20)EW as a minimum. The best thing to do is check on software advisor which is a Cisco tool

http://www.cisco.com/en/US/support/tsd_most_requested_tools.html

HTH

Jon

New Member

Re: rspan

thanks,

i checked it on the software advisor bu it give the following nessege:

Remote SPAN (RSPAN) Support for source and destination SPAN ports located on other compatible switches

for your knowledge the 4006 consist supIII engine

thanks

166
Views
0
Helpful
6
Replies
CreatePlease to create content