cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
403
Views
0
Helpful
1
Replies

Running Config Kron Occurrence Day Issue

IainTruesdale
Level 1
Level 1

Hi,


I am having an issue with IOS accepting a day (Sunday) specified when creating a Kron occurrence in IOS 12.2. I'm printing a copy of the running config then sending it off to an FTP server on the same subnet.


The occurance is to cli write the following Backup kron policy:


"kron policy-list Backup
cli show run | redirect ftp://x.x.x.x/example-voice-core-01.cfg"


With the occurrence being entered in as:


"#kron occurrence Backup at 23:00 Sun recurring"


This command gets accepted in config mode and writes the following to the kron occurrence list:


"kron occurrence Backup at 23:00 recurring
policy-list Backup"

Am I missing something? The occurrence works and i see the config on the FTP server each night at 23:00, but it doesn't include the fact that I am only looking for it to occur on a Sunday. I have tried the command with "Sun", "sun", and "Sunday", but obviously "Sun" should be working.

My clock settings are also ok.

Any help would be appreciated.

Cheers




1 Reply 1

Hi,

Can you post the outputof command "show kron schedule"

As far as command and its syntax is concern, you have done it correctly.

 

Regards,

Smitesh

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco