Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Running configuration backup to a TFTP Server using kron

hi,

can any one guide me how to configure the automatic running configuration backup to a TFTP server USING kron ..... in the 3560,3548,3550.

My TFTP server ip is 10.91.170.158.

i used this configuration...

#kron policy-list Backup

#do show run | redirecttftp://10.1.1.1/test.cfg

#kron occurrence Backup at 23:00 Sun recurring

#policy-list Backup

to verify the config i give this command ...

3560-24-2F-S1#sh kron sc

Kron Occurrence Schedule

Backup inactive, will run again in 0 days 00:00:12 at 8 :50 on Thu

but is not worked... i don't know what is the problem. even the TFTP is running and i'm able to ping the TFTP from the switch.

Can any one give me a good configuraion ?

2 REPLIES

Re: Running configuration backup to a TFTP Server using kron

Instead of :

do show run | redirecttftp://10.1.1.1/test.cfg

Use :

show run | redirecttftp://10.1.1.1/test.cfg

New Member

Re: Running configuration backup to a TFTP Server using kron

hi,

Thank you very much it is working :)

Thina.

2938
Views
0
Helpful
2
Replies
CreatePlease login to create content