Hi,
I've connected an INTIP card from an alcatel PABX to a switch (3548XL) and I have lot of runts input error in the interface :
sh int fa0/47
FastEthernet0/47 is up, line protocol is up
Hardware is Fast Ethernet, address is 0007.50c2.862f (bia 0007.50c2.862f)
Description: PABX-CARTE_INTIP prise 21
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 222/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Auto-duplex (Full), Auto Speed (100), 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output 00:00:00, output hang never
Last clearing of "show interface" counters 00:03:55
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 181000 bits/sec, 109 packets/sec
5 minute output rate 174000 bits/sec, 112 packets/sec
31458 packets input, 7048796 bytes
Received 0 broadcasts, 1350 runts, 0 giants, 0 throttles
1350 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast
0 input packets with dribble condition detected
33013 packets output, 6953859 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
What does it mean ? How to solve that ? I try to force the duplex and the speed in the intip card and in the interface of the switch with no success... The VLAN 1 is native and the VLAN 100 is in access on the interface.
