I need some help with RV042 router to allow broadcast to pass through.
I have tried simple scenario. Router is in "Router" mode. Firewall is disabled. Multicast pass through is enabled.
DHCP server in router is disabled. All IP addresses configured amyally as static.
PC1(192.168.3.10) connected to WAN(192.168.3.20) of router and PC2(192.168.4.10) connected LAN1(192.168.4.1).
When i trying to ping then both computers are seeing each other. Traceroute also shows 2 hops in both direction.
But when i start Broadcast listener in one computer (for example in PC2 on port 50000) and then send some data to same port and lan-broadcast address(192.168.4.255:50000) then PC2 received nothng . I have tried the same in opposite direction, but it doesn't work either.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...