I have 16 routers over 16 remote sites. When I go to 3 of them, I can do everything normally. When I try the other 13, I get the usual webpage that says the certificate is untrusted, (It's on all 16) but I cannot get past that. It will either freeze up or go to a blank screen when I try to continue on those 13. All configs should be identical except the hostname, the IP's and the location. I have remote access enabled on them all, and pings are all successful.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...