Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

S O S f?d?rator switch Catalyst 3750G-24TS-S Failure

We are encountering a failure of our federator switch a catalyst 3750G-24TS-S

The startup output on console port is as follow in the attached file

Our network is down (no communication between floors)

Can anybody help us, this is an emergency.

5 REPLIES
Silver

Re: S O S f?d?rator switch Catalyst 3750G-24TS-S Failure

Hi ,

It is better open a TAC case with cisco to resolve the issue because traceback is present in logs which can be decoded by TAC engineer for seacrhig for known issues.

Thanks,

satish

New Member

Re: S O S f?d?rator switch Catalyst 3750G-24TS-S Failure

Hi,

I have only guest level acces and cannot use TAC.

I need to know if it is hardware or software problem

please help us

bjw Silver
Silver

Re: S O S f?d?rator switch Catalyst 3750G-24TS-S Failure

A POST ASIC failure is pretty much always a hardware failure. It's the lowest level hardware diag (Power on self test)

New Member

Re: S O S f?d?rator switch Catalyst 3750G-24TS-S Failure

Hello,

The failure is indicated as follow :

POST: PortASIC CAM Subsystem Tests : End, Status Failed

Is the portASIC CAM Subsystem a replaceable component or does the switch have to be replaced.

Thanks for answering.

New Member

Re: S O S f?d?rator switch Catalyst 3750G-24TS-S Failure

Hello, I'd like to know how have you fixed this problem. Thanks, Douglas.

184
Views
0
Helpful
5
Replies
CreatePlease to create content