02-12-2007 10:05 AM - edited 03-05-2019 02:18 PM
We are encountering a failure of our federator switch a catalyst 3750G-24TS-S
The startup output on console port is as follow in the attached file
Our network is down (no communication between floors)
Can anybody help us, this is an emergency.
02-12-2007 09:14 PM
Hi ,
It is better open a TAC case with cisco to resolve the issue because traceback is present in logs which can be decoded by TAC engineer for seacrhig for known issues.
Thanks,
satish
02-13-2007 12:17 PM
Hi,
I have only guest level acces and cannot use TAC.
I need to know if it is hardware or software problem
please help us
02-13-2007 12:50 PM
A POST ASIC failure is pretty much always a hardware failure. It's the lowest level hardware diag (Power on self test)
02-21-2007 01:47 AM
Hello,
The failure is indicated as follow :
POST: PortASIC CAM Subsystem Tests : End, Status Failed
Is the portASIC CAM Subsystem a replaceable component or does the switch have to be replaced.
Thanks for answering.
04-03-2008 03:08 PM
Hello, I'd like to know how have you fixed this problem. Thanks, Douglas.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide