Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

same etherchannel grouping on different switch

Can i configure etherchannel and group each respective port on different switches as an etherchannel group ?

Example : 2 C2960 switch separately connected to a C3750

Thanks

7 REPLIES
Hall of Fame Super Gold

Re: same etherchannel grouping on different switch

No.

New Member

Re: same etherchannel grouping on different switch

thanks

New Member

Re: same etherchannel grouping on different switch

Can configure etherchannel on switchport access mode without vlan tagging ? ?

Cisco Employee

Re: same etherchannel grouping on different switch

Do you mean configure the etherchannel as access port with no vlan tag?

Yes, you can do the following on the etherchannel (PO)

switchport mode access

switchport access vlan xyz

Regards,

jerry

New Member

Re: same etherchannel grouping on different switch

Jerry

only this command "switchport mode access"

without this command "switchport access vlan xyz"

something like trunk mode

Cisco Employee

Re: same etherchannel grouping on different switch

Then the untagged vlan will be vlan 1 and this is the default.

Regards,

jerry

New Member

Re: same etherchannel grouping on different switch

Thanks Jerry

311
Views
0
Helpful
7
Replies