I have a pair nexus 5548 licensed for SAN, besides of having installed the module 8p 10GE Eth/FCoE + 8p 8/4/2/1G FC each switch, so, both switches are in operation, and i need to move the license and also the FC modules to another pair of switches nexus 5548. What should be the procedure to move the license and the modules to the another pair of switches nexus 5548???
I would appreciate the help with any recommendation and best practice for doing it.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...