i wanted to run a command on a defined day/time something like schedular,reason because i have made 2950 as DHCP server for each vlan's, so some time PC's couldn't get the ip address from the dhcp server as the reason that some of the ip address are listed in conflicted database of the switch,so i need to clear that when ever this problem come,so i wanted to enable schedular sought of thing, where every week say. every sunday 12:00 AM it should execute "clear ip dhcp conflict *" command, i think this schedular is possibile on the switch, but forgot the commands.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...