Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Schedule reload of router?

Hello,

Is it possible to schedule a router to reload every Saturday at midnight using the CLI and not a 3rd party product?

Many thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Schedule reload of router?

Cool Andy.. try this command and let us know if you have any issues.. if you think your question is solved, can you mark the post, so that

others who have the same issue can refer to this post ?

Thanks again

Raj

5 REPLIES

Re: Schedule reload of router?

Hi Andy

DO you want to reload every week, or just schedule it once ?

Try this command:

reload [[warm] [/verify | /noverify] text | [warm] [/verify | /noverify] in [hh:]mm [text] | [warm] [/verify | /noverify] at hh:mm [month day | day month] [text] | [warm] [/verify | /noverify] cancel]

you need to look at the local clock, and use that for reloading this router.... you can cancel reload whenever you want.

Hope this helps..All the best..

Raj

Community Member

Re: Schedule reload of router?

Thanks, yes it would be every Saturday.

Re: Schedule reload of router?

Sure.. just check if your IOS supports the above command.. and you can then try..

im curious to know why you would reboot a router every saturday ?

Raj

Community Member

Re: Schedule reload of router?

Thanks, it's a bad DSL line, for some reason it works so much better after I shutdown the atm interface and bring it back up.  If if the line has been up ages it's as if it gets very stale or sluggish.

Re: Schedule reload of router?

Cool Andy.. try this command and let us know if you have any issues.. if you think your question is solved, can you mark the post, so that

others who have the same issue can refer to this post ?

Thanks again

Raj

805
Views
0
Helpful
5
Replies
CreatePlease to create content