Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SDM on router 837

When trying to install SDM on my 837 router it prompts me for a user name and password as well as a hostname or IP address, how do I assign these to the router? is it just a matter of

comfig t

router# hostname XXX

2 REPLIES
New Member

Re: SDM on router 837

I would refer to the Quick Start Guide, also included with the hardware.

http://www.cisco.com/en/US/docs/routers/access/800/837/hardware/quick/guide/837qsg.html

Re: SDM on router 837

Hi Shane,

Assign an ip address on the router interface through which you connect to the router with SDM:

example:

conf t

interface FastEthernet0/0

ip address 10.1.1.1 255.255.255.0

Then create a username and password as follows:

conf t

username xxxxx privilege 15 password yyyyy

then enable http server:

ip http server

When SDM prompts you for the ip address, username and password, you should then type these in what you have configured into the router.

Cheers:

Istvan

189
Views
0
Helpful
2
Replies