Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Security ACL with Syslog

Does anyone know how to send the denied statistics to a syslog server for a security acl? I am using -- set security acl ip IPACL1 deny tcp any any eq 135 log -- on the switch. When I run -- show security acl log flow tcp any any -- I see entries but they are never sent to my syslog server. I set the syslog server facility to 5. Any suggestions?

2 REPLIES
Cisco Employee

Re: Security ACL with Syslog

you should set logging to the appropriate level based on the message...ex)

%SEC-6-IPACCESSLOGP

Set logging to level 6 in this instance

you would also want to enter the command:

logging

Are any other syslog messages making it to the syslog server? If not, then it isn't set to reach the server correctly.

New Member

Re: Security ACL with Syslog

Syslog server is getting information about ports connecting and disconnecting.

I set the level to 6 and i will check syslog.

thanks

134
Views
0
Helpful
2
Replies
CreatePlease to create content