Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Service Policy Attachment Failed Stacked 3750

I'm attempting to add a service policy to a voice vlan on a pair of stacked 3750s

When I add the second range of interfaces under class-map match-all ACM_EDGE_PORTS I am no longer able to add the service policy to the voice vlan.

If I remove the service-policy APM_VVLAN_POLICE from the policy map APM_VVLAN I am also able to add the service policy.

I have attached the config from the switches.  Thanks,

1 REPLY

Re: Service Policy Attachment Failed Stacked 3750

Hi

This is strange.. cant you give the input-interface range directly from fas 1/0/1 to fas 2/0/48 ?

In any case, I dont know why you are doing policing at your edge ports ? Ideally, you would just mark the packets on your edge switches, and leave the egress router to do polcing for the traffic... "mls qos trust" can be configure to trust the dscp values on the edge ports.. can you please let us know what you are planning as a part of QOS design ?

All the best...

Raj

839
Views
0
Helpful
1
Replies
CreatePlease to create content