set spantree bpduguard command

[mahesh18]

hi all,

on Catos switch  what does command   

sey spantree bpdu-guard 6/1-48 default mean?

my understanding is that it enables bpdu-guard globally on the module 6?

please let me know

thanks

mahesh

[Reza Sharifi · Accepted solution]

Hi,

Yes, it would enable it on all ports on module 6.  You can also enable it globally (see below command) for all modules. It is disabled by default.

set spantree portfast bpdu-guard enable

Have a look at this doc for more info:

http://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a008009482f.shtml

HTH

Reza

[Ganesh Hariharan · Accepted solution]

hi all,
on 
Catos switch  what does command    
sey spantree bpdu-guard 6/1-48 default mean?
my understanding is that it enables 
bpdu-guard globally on the module 6?
please let me know
thanks
mahesh

Hi Mahesh,

set spantree bpdu-guard mod/port {enable | disable | default} ,If you enter the default keyword, the spanning tree port is set to the BPDU guard state globally.To enable or disable BPDU guard for all ports on the switch, enter the set spantree global-default bpdu-guard command.

Hope to Help !!

Ganesh.H

Remember to rate the helpful post