Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

setting up guest internet access with router

Hi all, I have a new site where they want some sort of guest internet access that does not touch our lan, I have a 873 router that has a public ip address that is only been used for remote vpn into the site, however I need to now use this for internet access also,

Can anyone show me how I can do this, I simply only want to allow clients on the 10.117.202.0 subnet out to the internet, the vpn clients that need no nat are on the 10.117.198.0 network. There is also a route back to my internal network for the whole 10.0.0.0 network, I want an access list that blocks anything from the guest internet clients going to this also, would it be something like ip access-list exentended internet, permit 10.117.202.0 0.0.0.255 any ?

hope for your help

cheers

Carl

hope you can help cheers

1 REPLY

Re: setting up guest internet access with router

If Internet is connected on S0/0, and LAN on

int f0/0, then configure this way on the router -

int s0/0

ip nat outside

int f0/0

ip nat inside

access-list 10 permit 10.117.202.0 0.0.0.255

ip nat inside source list 10 interface serial 0/0 overload

Hope this Helps.

122
Views
0
Helpful
1
Replies
CreatePlease to create content