Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

setting up my network

hi,

I'm trying to get my hands on these routers and switches,

i have recently failed the ICND1 exam for lack of practices,

i need to setup a network of 3pcs and a network printer, using nat.

i have a cisco router 2500 series and 24ports switch and i have cable internet access.

I tried using nat to access to the internet but it failed. I want all the devices access to the internet and have the pcs sharing the printer. I think nat is the best way to do this. please help

1 REPLY
Cisco Employee

Re: setting up my network

Here are several links to good NAT documents.

NAT FAQ

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_q_and_a_item09186a00800e523b.shtml

12.4 NAT config guide

http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iadnat_addr_consv_ps6350_TSD_Products_Configuration_Guide_Chapter.html

Static NAT and Dynamic NAT

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080093f31.shtml

Here is my simple config example

servers, 10.1.1.1----SW----10.1.1.2 F0/0 router f0/1 11.1.1.1--------------outside world

router

int f0/1

ip add 11.1.1.1

ip nat outside

int f0/0

ip add 10.1.1.1

ip nat inside

ip nat inside soure list 101 int f0/1 overload ---> dynamic PAT

access-list 101 permit ip 10.1.1.0 0.0.0.255 any

KK

147
Views
0
Helpful
1
Replies