Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

setup RPS 2300 priority via CLI

Hi,

What 3560/3750 CLI command will set priority of an RPS 2300 power system?

Best regards, Peter

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: setup RPS 2300 priority via CLI

Use the power rps user EXEC command on the switch stack or on a standalone switch to configure and manage the Cisco Redundant Power System 2300, also referred to as the RPS 2300, connected to the switch stack or a standalone switch. power rps switch-number {name {string | serialnumber} | port rps-port-id {mode {active | standby}{priority priority}

1 REPLY
Silver

Re: setup RPS 2300 priority via CLI

Use the power rps user EXEC command on the switch stack or on a standalone switch to configure and manage the Cisco Redundant Power System 2300, also referred to as the RPS 2300, connected to the switch stack or a standalone switch. power rps switch-number {name {string | serialnumber} | port rps-port-id {mode {active | standby}{priority priority}

3492
Views
0
Helpful
1
Replies