cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5466
Views
0
Helpful
1
Replies

setup RPS 2300 priority via CLI

pverstegen
Level 1
Level 1

Hi,

What 3560/3750 CLI command will set priority of an RPS 2300 power system?

Best regards, Peter

1 Accepted Solution

Accepted Solutions

owillins
Level 6
Level 6

Use the power rps user EXEC command on the switch stack or on a standalone switch to configure and manage the Cisco Redundant Power System 2300, also referred to as the RPS 2300, connected to the switch stack or a standalone switch. power rps switch-number {name {string | serialnumber} | port rps-port-id {mode {active | standby}{priority priority}

View solution in original post

1 Reply 1

owillins
Level 6
Level 6

Use the power rps user EXEC command on the switch stack or on a standalone switch to configure and manage the Cisco Redundant Power System 2300, also referred to as the RPS 2300, connected to the switch stack or a standalone switch. power rps switch-number {name {string | serialnumber} | port rps-port-id {mode {active | standby}{priority priority}

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: