SFP-10G-SR-S for C3850-24XS

[matze123]

Hi Guys,

is it possible to use the SFP-10G-SR-S Module for the C3850-24XS-S with the IOS Version 16.6.1 (Everest) and any Network Module (4x10G, 8x10G) installed?

Thanks in advance for your help!

Regards

Mathias 

[Seb Rupik · Accepted solution]

Hi there,

The 16.6.1 release notes state that the network module is supported:

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/16-6/release_notes/ol-16-6-3850.html#pgfId-1265268

As for the SFP+, the compatibility matrix states that the minimum supported release is 3.7.1E which was the first image available for the switch, so you can infer that 16.6.1 will be supported:

https://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/10GE_Tx_Matrix.html#_Toc496021460

cheers,

Seb.

[matze123]

Thanks for your help!!