11-25-2010 03:40 AM - edited 03-06-2019 02:12 PM
Hi Experts,
I want to know that what is difference between below both modules ?
1000BASE-LX
30-1299-01 1310nm
S/N:XXXXXX 04-27
Class 1 laser Product 21 CFR (J)
GLC-LH-SM COM
30-1299-01 LN#50 7/2001
CLASS 1 21CFR 1040.10
MADE IN CHINA
SN:XXXXXX
Thanks,
Vaibhav
11-25-2010 04:16 AM
Vaibhav
One is the production description and one is the Cisco part number, see table 5 in this doc -
Jon
11-25-2010 01:39 PM
1000BASE-LX
1000BASE-LX/LH SFP for Both Multimode and Single-Mode FibersThe 1000BASE-LX/LH SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers. When used over legacy multimode fiber type, the transmitter should be coupled through a mode conditioning patch cable. For details on this implementation, refer to http://www.cisco.com/en/US/customer/prod/collateral/modules/ps5455/product_bulletin_c25-530836.html.
GLC-LH-SM
1000BASE-LX/LH long-wavelength/long haul; without DOM
11-29-2010 02:30 PM
Leolaohoo stated the big difference: LX/LH transceivers can run over multi mode fiber (with which Cisco recommends using a mode conditioning patch cable) while LH-SM transceivers can only be used over single mode fiber.
Hope this helps,
Jeff
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: