Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

SFP Necessary for Catalyst 3750

HIo,

I have a stack with two 3750 Catalyst.We currently have four ports TenGiga ports of which we are  using two. I wonder if i could use the another two free ports to connect with a EMC. I would like to connect the ports Te3/0/2 and Te4/1/2 to an EMC storage .  The port 3/0/2  has a SFP trasceiver but port 4/1/2 not. we would need to buy a SFP for port 4/1/2. What SFP should buy ( partnumber ) for Te4/1/2?.

Switch Ports Model              SW Version            SW Image

------ ----- -----              ----------            ----------

*    3 30    WS-C3750E-24TD     12.2(53)SE2           C3750E-UNIVERSALK9-M

     4 54    WS-C3750X-48       12.2(53)SE2           C3750E-UNIVERSALK9-M

NAME: "TenGigabitEthernet3/0/1", DESCR: "10GBase-SR"

PID: X2-10GB-SR        , VID: V01  , SN: OE28002940

NAME: "TenGigabitEthernet3/0/2", DESCR: "10GBase-SR"

PID: X2-10GB-SR        , VID: V01  , SN: OE28002804

NAME: "TenGigabitEthernet4/1/1", DESCR: "SFP-10GBase-SR"

PID:                   , VID: V00  , SN: ECL1446013N

On  the other hand , in the link I found the device ws-  C3750X -48 ( cat4 ) only support SFP -10G- SR ( dual LC connector ) ,  while teams WS - C3750E - 24TD ( cat3 ) support both modules X2 -10GB- SR and SFP- 10G- SR .

Can you confirm me this ? I

http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6974.html#wp48759

Thanks a lot

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

SFP Necessary for Catalyst 3750

1 REPLY
VIP Super Bronze

SFP Necessary for Catalyst 3750

109
Views
0
Helpful
1
Replies
CreatePlease to create content