06-17-2009 10:02 AM - edited 03-06-2019 06:19 AM
Does anyone know if you can install an SFP+ transceiver (SFP-10G-SR) like a regular SFP (GLC-SX-MM)in the twingig module on a 3750e? or do you have to go with the x2 for 10Gb? thanks.
Solved! Go to Solution.
06-17-2009 10:16 AM
Hello Brandon,
according to
http://www.cisco.com/en/US/docs/switches/lan/catalyst3750e_3560e/hardware/install/notes/1757202.html
is not supported so you need an X2 format module to replace the twingig module
Hope to help
Giuseppe
06-17-2009 10:16 AM
Hello Brandon,
according to
http://www.cisco.com/en/US/docs/switches/lan/catalyst3750e_3560e/hardware/install/notes/1757202.html
is not supported so you need an X2 format module to replace the twingig module
Hope to help
Giuseppe
06-17-2009 10:30 AM
that's what i thought, but wanted to verify. thanks.
06-17-2009 12:30 PM
Hi.
The Twingig is explicitly made to change an X2 10Gbps port to two 1 Gbps SFP ports, so no.
HTH.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: