Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SFP+ transceiver in 3750e

Does anyone know if you can install an SFP+ transceiver (SFP-10G-SR) like a regular SFP (GLC-SX-MM)in the twingig module on a 3750e? or do you have to go with the x2 for 10Gb? thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: SFP+ transceiver in 3750e

Hello Brandon,

according to

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750e_3560e/hardware/install/notes/1757202.html

is not supported so you need an X2 format module to replace the twingig module

Hope to help

Giuseppe

3 REPLIES
Hall of Fame Super Silver

Re: SFP+ transceiver in 3750e

Hello Brandon,

according to

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750e_3560e/hardware/install/notes/1757202.html

is not supported so you need an X2 format module to replace the twingig module

Hope to help

Giuseppe

New Member

Re: SFP+ transceiver in 3750e

that's what i thought, but wanted to verify. thanks.

Bronze

Re: SFP+ transceiver in 3750e

Hi.

The Twingig is explicitly made to change an X2 10Gbps port to two 1 Gbps SFP ports, so no.

HTH.

255
Views
0
Helpful
3
Replies