Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

sh cef drop and Encap_fail counter

I have the following in the RP of a 6509, sup1a/MSFC2.

#sh cef drop

Slot Encap_fail Unresolved Unsupported No_route No_adj

ChkSum_Err

RP 265238851 0 0 9275519 0

0

The Encap_fail creeps up about 4-5 every 10 seconds. Any ideas? Something

to worry about?

Rgds

Eng Wee

1 REPLY

Re: sh cef drop and Encap_fail counter

Hi,

It might be a problem, but the first thing I would do is "debug ip cef drops" to see what traffic is being cef-dropped. From that you can track down the applications/users which may be affected.

This doc might also be useful:

http://www.cisco.com/en/US/tech/tk827/tk831/technologies_tech_note09186a0080094303.shtml

and don't forget to look up "show cef drop" in the command reference - quite often you'll get useful information there too.

HTH - plz rate if useful

Andrew.

1149
Views
0
Helpful
1
Replies