Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

sh platform port-asic stats drop fastEthernet 1/0/16 doesnt work on second switch

I'm troublshooting a outdiscards problem. In trying to demonstrate just what the heck is happening I'm running the following command to show what queues are dropping packets. The command takes on the first switch on the stack just fine but when I try it on switch 2 or 3 I get the error message below. Thats its not a local port. What gives, how do  I see the queues on the second and third switches.

#sh platform port-asic stats drop fastEthernet 1/0/16

  Interface Fa1/0/16 TxQueue Drop Statistics
    Queue 0
      Weight 0 Frames 0
      Weight 1 Frames 0
      Weight 2 Frames 0
    Queue 1
      Weight 0 Frames 0
      Weight 1 Frames 0
      Weight 2 Frames 3
    Queue 2
      Weight 0 Frames 0
      Weight 1 Frames 0
      Weight 2 Frames 8347
    Queue 3
      Weight 0 Frames 163471
      Weight 1 Frames 0
      Weight 2 Frames 1735

#sh platform port-asic stats drop fastEthernet 2/0/16
%Command Rejected: interface 'FastEthernet2/0/16' is not local port

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: sh platform port-asic stats drop fastEthernet 1/0/16 doesnt

You can either do the command from the Master switch in the stack

remote command 2 show plat port-asic stats drop fa2/0/16

or you can go to the member switch

session 2

show plat port-asic stats drop fa2/0/16

Let me know if this helps.

2 REPLIES
Cisco Employee

Re: sh platform port-asic stats drop fastEthernet 1/0/16 doesnt

You can either do the command from the Master switch in the stack

remote command 2 show plat port-asic stats drop fa2/0/16

or you can go to the member switch

session 2

show plat port-asic stats drop fa2/0/16

Let me know if this helps.

New Member

Re: sh platform port-asic stats drop fastEthernet 1/0/16 doesnt

Thanks,

This is just what I was trying to figure out.

1977
Views
0
Helpful
2
Replies