Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

share PC in 2 different Vlan

Hi all!

Qustion about 877 K9 dls router.

I have 2 vlans: 10.10.10.0 255.255.255.240, switchport FE0  and 10.10.20.1. 255.255.255.240 switchport FE1.

for my dsl link i use IRB config with dinami ip address.

internet connection works for both vlans.

I have host 10.10.10.3 is shared in 10.10.10.0 network(works well) and need to share it  for a 10.10.20.0 network.  from 10.10.20.2 machine i can ping it, but when I try to open shared printer, windows shows - host not found.

ho can i solve this?

2 REPLIES
New Member

Re: share PC in 2 different Vlan

sounds like you need to add a static route.

ip route 10.10.20.0 255.255.255.240 FastEthernet0/1

even though you have the subnet as 10.10.20.1 i think you ment 10.10.20.0 since a 240 subnet would be 10.10.20.0 thru 10.10.20.15.

New Member

Re: share PC in 2 different Vlan

I have disabled Windows intergrated firewall and problem solved.

Thanks!!!

293
Views
0
Helpful
2
Replies