Ok after playing with multicast even more i have another question. According to ciscos site: (This is using BRS)
(Optional) Integer from 0 to 255. The bootstrap router with the larger priority is preferred. If the priority values are the same, the router with the larger IP address is the bootstrap router. The default value is 0.
However it seems from the output of show ip mrouter that the higher lower RP is preferred. Or am i reading this wrong?
____SHOW IP RP MAPPING (126.96.36.199 pri higher)____
RP 188.8.131.52 (?), v2
Info source: 184.108.40.206 (?), via bootstrap, priority 199, holdtime 150
Uptime: 00:31:17, expires: 00:02:23
RP 220.127.116.11 (?), v2
Info source: 18.104.22.168 (?), via bootstrap, priority 200, holdtime 150
Uptime: 00:40:20, expires: 00:02:21
__SHOW IP MROUTE (22.214.171.124 pri higher)____
(*, 126.96.36.199), 00:11:21/00:00:35, RP 188.8.131.52, flags: SP
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.