Shoretel Phone System Auto QoS: Cisco 2960s, 5k's, and 5510 Firewall
We have recently deployed a Shoretel Phone system in our environment and are experiencing a tremendous amount of Packet Loss/Jitter/Latency on both internal and external phones. We want to enable QoS but would like clarification as to what we need to enable QoS on if not the whole environment. Any information relating to prior experience would be greatly appreciated.
Our network environment consists of:
(2) Nexus 5ks (all stacks connect to)
Cisco 5510 Firewall
Cisco Router (provided by carrier)
WindStream PRI (connected directly to Shoregear switch)
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.