Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Short LACP Timeout on Catalyst 3560G

I want to enable short LACP timeouts on a Cisco Catalyst 3560G running IOS 12.2(50)SE1.

Does Cisco support short LACP timeouts on this switch? I cannot find the right command to do so.

My current config is:

interface GigabitEthernet0/5

lacp port-priority 600

channel-protocol lacp

channel-group 1 mode active

spanning-tree portfast

!

interface GigabitEthernet0/6

lacp port-priority 700

channel-protocol lacp

channel-group 1 mode active

!

interface Port-channel1

spanning-tree portfast

!

lacp system-priority 1200

Any help will be appreciated. Thanks.

1 REPLY

Re: Short LACP Timeout on Catalyst 3560G

Hello.

I think the command you are looking for is 'lacp rate fast'

Unfortunately this is only supported on the 6500.

Simon

3040
Views
0
Helpful
1
Replies
CreatePlease to create content