Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Should I replace the SUP720 just on one occurence of this problem.

See more information in attached file called SUP720.txt.

Should I replace the SUP720 just on once occurence of this problem.

According to the Messages and Recovery Manual at the following link, we really should be able to ignore this error if the recovery is successful.

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/7.x/system/messages/emsg.html

=========================================

2008 Aug 11 21:08:20 EDT +10:00 %SYS-3-FAB_SYNCERR:SYNC ERROR detected on fabric channel 5 from module 5

2008 Aug 11 21:10:00 EDT +10:00 %SYS-5-SUP_MODSBY:Module 6 is in standby mode

2008 Aug 11 21:10:16 EDT +10:00 %SYS-5-SUP_IMGSYNC:File synchronization process will start in 10 seconds

2008 Aug 11 21:10:18 EDT +10:00 %SYS-5-FAB_CHANNELINSYNC:Fabric channel LC 6, ch an 0 to FAB 5, chan 5 is now in sync

2008 Aug 11 21:10:26 EDT +10:00 %SYS-5-SUP_IMGSYNCSTART:Active supervisor is syn chronizing bootflash:cat6000-sup720cvk8.8-1-2.bin

2008 Aug 11 21:10:26 EDT +10:00 %SYS-5-SUP_IMGSYNCFINISH:Active supervisor has s ynchronized bootflash:cat6000-sup720cvk8.8-1-2.bin

2008 Aug 11 21:11:25 EDT +10:00 %SYS-5-PORT_SSUPOK:Ports on standby supervisor ( module 6) are up

1 REPLY
New Member

Re: Should I replace the SUP720 just on one occurence of this pr

Nah. It could of been congested for whatever reason. If you feel unsure... attempt to swap with a lab sup and force sync multiple times... if the same problem then rma.

127
Views
3
Helpful
1
Replies
CreatePlease to create content